MHL Horizontal Mount / Adjustable Tensioners
The MHL Tensioner is mounted horizontally or 90 degrees to the mounting slots. Note that both ends of the hub are tapped. In this way, the SO5 and SO6 shafts can be installed on either end of the Hub.
| Model No. | Use with Shaft No.* | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | App. Wt. | Downloads | |||
| MHL | SO5 | 3-1/4" | 4" | 1-1/2" | 12-1/2" | 3" | 1-14 | 3" | 2-1/2" | 1" | 3-1/2" | 7/8" | 1-3/4" | 2-3/4" | 3-1/2" | 7/8" | 11.5 | dwg | dxf | step | igs |
| MHL | SO6 | 5-1/4" | 6" | 1-1/2" | 12-1/2" | 3" | 1-14 | 3" | 2-1/2" | 1" | 3-1/2" | 7/8" | 1-3/4" | 2-3/4" | 3-1/2" | 7/8" | 11.5 | dwg | dxf | step | igs |
*Idler shaft and set collar not included in tensioner unit. Must be ordered separately.