H-Series / Screw Adjustment Tensioners
The Universal Drive Tensioner shaft mounted series is ideal for locations where it is impractical to bolt a tensioner to the frame of a machine. This drive tensioner can be easily located at any point on a shaft; at the same time permitting positioning at any point on a 360º arc.
A split in the base of the arm, along with a locking screw, permits easy movement and tight clamping on the shaft. The shaft mounted tensioner when used in pairs, makes a practical snubber for head and tail pulleys.
| Model No. | Use with Shaft No.* | A | B | C | D | E | F | G | H | I | J | K | L | M | N | App. Wt. | Downloads | |||
| HS | SO1 | 1-1/16" | 1-1/2" | 1/2" | 1-1/2" | 1-1/16" | 5-1/2" | 4-3/4" | 3/8" | 1/4" | 1-13/16" | 3/4" | 1/4" | 2" | 1-3/8" | 0.84 | dwg | dxf | step | igs |
| HM | SO2 | 1-1/2" | 2-1/8" | 1" | 2-1/2" | 1-1/2" | 9-3/8" | 8-3/8" | 3/4" | 1/2" | 2-3/4" | 1" | 3/8" | 4" | 2-3/16" | 4.25 | dwg | dxf | step | igs |
| HM | SO3 | 2-1/2" | 3-1/8" | 1" | 2-1/2" | 1-1/2" | 9-3/8" | 8-3/8" | 3/4" | 1/2" | 2-3/4" | 1" | 3/8" | 4" | 2-3/16" | 4.25 | dwg | dxf | step | igs |
| HM | SO4 | 3-1/2" | 4-1/8" | 1" | 2-1/2" | 1-1/2" | 9-3/8" | 8-3/8" | 3/4" | 1/2" | 2-3/4" | 1" | 3/8" | 4" | 2-3/16" | 4.25 | dwg | dxf | step | igs |
| HL | SO5 | 3-1/4" | 4" | 1-1/2" | 3-5/8" | 2-3/8" | 16" | 14-1/2" | 1-1/4" | 3/4" | 4-3/8" | 1-3/4" | 5/8" | 8" | 3-1/4" | 15.88 | dwg | dxf | step | igs |
| HL | SO6 | 5-1/4" | 6" | 1-1/2" | 3-5/8" | 2-3/8" | 16" | 14-1/2" | 1-1/4" | 3/4" | 4-3/8" | 1-3/4" | 5/8" | 8" | 3-1/4" | 15.88 | dwg | dxf | step | igs |
*Idler shaft and set collar not included in tensioner unit. Must be ordered separately.